
CO2 Monitor & Automatic Fresh-Air Controller
CO2 monitor that switches your fresh-air fan on and off by itself.
GST, freight and installation extra
Order Now opens WhatsApp with your order ready to send to +91 99991 01598.
Every person, animal and growing crop breathes out CO2. In a closed room it builds up quietly — there is no smell and nothing to see — until people feel heavy and tired, or a mushroom crop starts growing long stems and small caps.
Co2Pilot keeps watch for you. Its infrared sensor reads the air every few seconds and switches your exhaust or fresh-air fan the moment CO2 climbs past your limit, then turns it off again once the room has been flushed. You get fresh air when it is needed, and you stop paying to run a fan — or to re-cool hot outside air — when it isn’t.
A plain CO2 meter only gives you a number. Co2Pilot uses that number to run your fan, so the room corrects itself day and night.
Plug the fan into the socket on the unit, plug the unit into the wall and set your limits. No contactor panel and no extra wiring.
The same sensing principle used in lab and HVAC instruments — stable readings that don’t drift with dust or humidity.
CO2, temperature and humidity side by side on a bright backlit display, readable across the room.
Over Wi-Fi, see live readings, fan status and the day’s trend on your phone or laptop — and download the log for your records.
The fan runs only as long as the air needs changing, which cuts fan hours and keeps cooled or heated air inside the room.
Fully automatic, 24 × 7 — set it once and the room looks after itself.
The sensor reads CO2, temperature and humidity every few seconds and shows them live on the display.
When CO2 crosses your upper limit (for example 1,000 ppm), Co2Pilot powers the fan to pull in fresh air. An optional buzzer warns at a higher alarm level.
Once fresh air brings CO2 down to your lower limit (for example 800 ppm), the fan stops by itself — and the cycle repeats round the clock.
The fan ON, fan OFF and alarm limits are all set from the four keys on the front — choose tighter limits for a mushroom crop, gentler ones for an office.
Start with the controller alone, or let ClimoAI supply the whole fresh-air system for your room.
Sensor, display, keypad, buzzer and fan socket in one wall-mounted unit, with Wi-Fi for live readings.
Perforated duct and inline fan, sized to your room, that spread fresh air evenly along its whole length. Optional.
Run a fan in another room or floor from the same controller, with no cable between them. Optional.
Readings, trend graph and fan ON / OFF history in any web browser, with an Excel download. No app to install.
Indicative values — confirmed with your quote.
| CO2 sensor | NDIR (infrared), 400 – 5,000 ppm |
|---|---|
| Temperature | 0 – 50 °C |
| Humidity | 0 – 95% RH |
| Display | Backlit LCD — CO2, temperature and RH together |
| Keys | 4-key front panel |
| Fan output | Built-in AC socket for one fan |
| Set points | Fan ON, fan OFF and alarm limits, user-settable |
| Connectivity | Wi-Fi — live readings, trend graph, Excel log |
| Power supply | 230 V AC, 50 Hz |
| Coverage | About one room per unit — add units for more zones |
| Mounting | Wall mounted, at breathing height |
| Operation | 24 × 7 automatic |
Mushroom and greenhouse growers, indoor and hydroponic farms, cold-store and warehouse operators, poultry and dairy farms, office and facility managers, schools, clinics, gyms and restaurants — and anyone with a closed, air-conditioned or crowded room that needs fresh air without leaving the doors open.
Tell us the room size and what it is used for, and ClimoAI will confirm the right setup — controller only, or with duct and fan — and quote it.