Ready-to-Run Grow Room Control
One controller for the air handling unit of each mushroom cropping room. It arrives as a complete panel with sensors and wiring, and our engineers install it, set up your recipes and train your growers.
Shaped by Real Mushroom Farming
MycoPilot comes from the Bandhuja group, which brings hands-on mushroom experience into farm automation. Its recipes follow the way a grower actually moves a room from spawn run through case run, pinning and every flush.
Every Reading, Every Output, One Glance
See and Control Each Room From Anywhere
A Complete Picture of the Room
Dedicated sensors follow the air, the compost, the CO₂ and the humidity, so MycoPilot always acts on what is really happening.
Air Temperature
PT100 · 0–50 °C · 0.1 °C resolutionReads the room air and drives cooling, heating and the ramp in progress, so the whole room follows the stage recipe.
Compost Temperature
PT100 · probe in the bedSits inside the compost and shows what the crop is actually feeling — vital in spawn run, when the compost makes its own heat.
CO₂ Concentration
NDIR · 400–20,000 ppmCovers the high CO₂ of spawn run and the low levels of pinning, and sets how far the fresh-air damper opens.
Relative Humidity
10–98 % RHBuilt for the wet air of a cropping room. Controls humidifying and dehumidifying for each growing stage.
Door & Fault Contacts
Digital inputsTell the controller when a door is open or a machine has tripped, and raise an alarm straight away.
The Whole AHU Works as One
Up to 12 outputs by relay, 0–10 V and Modbus VFD. Damper, fan, cooling, heating and humidity are adjusted together, never against each other.
Fresh-Air Damper
Motorised damper positioned for the CO₂ target, with automatic re-calibration so the position stays true.
AHU Fan
Fan speed set through the VFD, giving the air volume each stage needs without wasting power.
Cooling
Runs a chiller valve, or up to three staged compressors with automatic rotation to share the wear.
Heating & Steam
Switches the heater and steam valve, with interlocks so heating and cooling never fight each other.
Humidifier / Dehumidifier
Holds room humidity for each stage, with an interlock against over-lap with the other outputs.
Full Control at the Room Door
Growers can run every room from the panel, with no phone or internet connection needed.
Live Readings
Air and compost temperature, CO₂ and humidity for the room, right at the door.
Three Control Modes
Manual, semi-automatic or AI automatic — switch whenever you want.
Stage Recipes
Ready recipes for spawn run, case run, pinning and flushes.
Gradual Ramps
Smooth set-point changes in °C/hour, %/hour and ppm/hour.
Manual Override
Take any output by hand, then hand it back to auto when you choose.
Field Calibration
Calibrate the sensors on site from the panel itself.
High / Low Alarms
Limits for every value, plus detection of a failed sensor.
Flush Counter
A flush count and day-wise crop calendar for every room.
Equipment Interlocks
Heater, steam and humidifier are locked against over-lap.
Role-Based Access
Separate access for the owner, manager and grower.
Works Offline
Keeps running the recipe if the internet goes down.
Power-Cut Recovery
Recipes are stored on board and restart on their own.
Manage the Farm From Anywhere
ClimoCloud brings every room to one secure place, on any phone or laptop.
Remote Set-Points
Change set-points and recipes from anywhere, with a full audit trail.
Recipe Library
Save a recipe, copy it to other rooms and adjust it for each one.
Instant Alerts
WhatsApp, SMS, email and app alerts when anything drifts.
Team Roles
Access for owners, managers, growers and consultants.
One Login
From a single room to many farms, all under one account.
Automatic Sync
Data recorded during an internet outage syncs when it returns.
One Farm, Every Screen
Android & iOS App
The farm in your pocket, built for quick decisions on the move.
- Live room readings
- WhatsApp, SMS and push alerts
- Remote set-point changes
- Every room in one view
Web Dashboard
A full control surface for the office, on any laptop or desktop browser.
- One screen for all rooms
- Recipe saving and copying
- User roles and permissions
- Audit trail of every change
Reports & History
Know what happened in every room, in every crop.
- History graphs per room and batch
- Daily, batch and yield reports
- PDF and Excel downloads
- Every control change logged
Every Room, Every Batch
MycoPilot logs every change, so you can see what the room did and why.
Live Values
Temperature, compost, CO₂ and humidity for each room, updated continuously.
History Graphs
Trends for every room and every batch, to compare crop against crop.
Fan Status
See what the AHU is doing alongside the climate it is producing.
Alarm Records
High and low alarms and sensor faults, kept with the room's history.
Batch Reports
Daily, batch and yield reports ready for the farm owner.
Excel & PDF
Download records whenever you need them.
Built Around the Mushroom Crop
Stage-wise programmes hand over automatically from spawn run to case run and pinning, with smooth ramps between targets.
Manual
Your own targetsFull hand controlAny output, any timeSpawn Run
CO₂: ~10,000 ppmRH: 90–95 %Air: ~24 °C · ~14 daysCase Run
CO₂: ~8,000 ppmRH: 90–95 %Air: ~24 °C · ~7 daysPinning
CO₂: ~1,200 ppmRH: ~90 %Air: ramp to 17–18 °CFlushes
CO₂: ~1,000 ppmRH: 85–90 %Air: 16–18 °CYour Recipes
Button, oyster, specialityCopy to any roomAutomatic hand-overValues shown are typical starting points for button mushrooms. Every target can be changed to suit your crop and compost.
Technical Details
Measurement
| Temperature | 2 × PT100, 0–50 °C, resolution 0.1 °C |
|---|---|
| CO₂ | NDIR, 400–20,000 ppm |
| Relative humidity | 10–98 % RH |
Control
| Outputs | Up to 12 (relay, 0–10 V, Modbus VFD) |
|---|---|
| Modes | Manual, semi-automatic, AI automatic |
| Recipes | Stage-wise with ramps and hold times |
Hardware
| Display | 7-inch colour touch screen |
|---|---|
| Panel | Powder-coated panel, IP54, with MCBs and terminals |
| Power supply | 230 V AC ±15 %, 50 Hz |
| Operating conditions | 0–50 °C, up to 98 % RH (non-condensing) |
Connectivity
| Network | Ethernet, Wi-Fi, 4G (optional) |
|---|---|
| Protocols | Modbus RTU / TCP |
| Cloud | ClimoCloud web dashboard & mobile app |
Specifications may change as the product is improved. Contact us for the latest datasheet.
What's Included
- Controller panel with touch screen
- Air and compost PT100 probes
- CO₂ and humidity sensor
- Wiring set and installation hardware
- ClimoCloud account and app access
Installation, Warranty & Support
- On-site installation and commissioning by our engineers
- Recipe set-up for your crop and grower training
- 1-year warranty, extendable annual maintenance plans
- Remote support through ClimoCloud
Where It Is Used
Common Questions
Will it work with my existing AHU?
Yes, in most cases. We survey your AHU, damper and chiller set-up first and add only the actuators or VFD that are missing.
Can the grower still control things by hand?
Yes. Every output can be switched to manual from the touch screen or app, and the controller returns to auto when you choose.
What if the power or internet goes off?
Recipes and settings are stored in the controller. After a power cut it restarts the recipe on its own; without internet it keeps working and syncs data later.
Can I copy one room's recipe to other rooms?
Yes. Recipes can be saved, copied and adjusted for each room from ClimoCloud.
Other ClimoAI Controllers
Co2Pilot
Measures CO₂ with an NDIR sensor and switches exhaust or fresh-air fans automatically at your chosen levels — fresh air when a space needs it, energy saved when it doesn't..
View detailsClimate Control & MonitoringTemperature Humidity Controller
Keeps temperature and humidity within the band you set by switching cooling, heating, humidifiers or dehumidifiers — with alarms and records for every room..
View detailsReady to Automate Your Grow Room With MycoPilot?
Share your requirement and our team will recommend the right set-up, send a quote and plan installation.